Why is my DVD player not reading discs?

Playback problems with a DVD typically are caused by one of four factors: The DVD is dirty and smudged; the laser lens in the DVD player’s disc drive needs cleaning; the DVD player no longer is tracking properly; or the disc is scratched.

Why does my Philips DVD player say no disc?

Look to make sure the disc is correctly placed on the disc tray. If the disc is off center the DVD player cannot read the content and will produce the “No Disc Error.”

How do you reset a DVD player?

Reset the unit as follows:

1. Press the [POWER] button on the DVD player to turn it on.
2. Press the [OPEN/CLOSE] button to open the disc tray.
3. Press the number button “ 5 ” on the remote control 4 times. (The power is automatically turned off.) All the settings return to the factory preset.

How do you fix a DVD player that says Cannot play disc?

Some DVD players may display a Check Disc error….If the issue continues, try doing a power reset.

1. Turn off the DVD player.
2. Unplug the power cord of the DVD player from the AC outlet.
3. Let the DVD player remain without power for 1 minute.
4. Plug the power cord back into the AC outlet.
5. Turn on the DVD player.

How do I reset my Philips Blu-Ray player?

Press the Home button on the Blu-ray Disc player remote. Once the menu is displayed, press the Left arrow button on the remote and navigate to the option Setup. On Setup, use the Down arrow button and go to Resetting and press the Enter button.

How do I unlock my Philips DVD player?

Philips “Disc Lock” default unlock code: 136900

Just type this in as a code and press OK. The locked disc will then be unlocked and playable again. Don’t forget to disable “Disc Lock” feature in settings after you unlock it. Hope this will come in handy to all those who locked themself out unintentionally.

Why won’t my Philips Blu-Ray player play blu ray discs?

The Blu-ray disc tray may be damaged – If you have an ejectable disc tray, eject your disc and take care to observe any slow opening, wobbles, or misalignment. Try reseating the disc. Blu-ray cables may be loose – A loose connection or incorrect connection will prevent the video from being displayed.

Is there a reset button on a DVD player?

You can reset your DVD player either via a remote control combination button press or via the screen menu (SETUP) return set (reset). Your instruction manual will normally give accurate instructions for resetting the player. Look over the chapeter titled “reset” or “Initialize mode” .

Do DVD players have a reset button?

Ensure no discs are playing in the DVD player. On the DVD remote control, press the UP ARROW or DOWN ARROW button to select the SETUP icon. Press the ENTER button. Press the UP ARROW or DOWN ARROW button to select RESET .

How do you clean an optical lens on a DVD player?

How To Clean an Optical Disc Player

How do I update my Blu-Ray player?

Power on the Blu-ray Disc player. If there is a disc in the player, please remove the disc. At the Home Screen menu, use the arrow keys on the remote control to select Setup – Software Update and then press the ENTER button. A New Software Version available message will be prompted.

How do you open a stuck Blu-Ray player?

Follow these instructions to open the disc tray and remove the disc.

1. Turn off your device.
2. Unplug the power cord or AC adapter.
3. Press and hold the OPEN/CLOSE button on the front panel of the disc player, and plug the power cord back in.
4. After the tray opens, release the OPEN/CLOSE button.
5. Remove the disc.

How do I connect my Philips Blu-Ray player to WIFI?

Wireless

1. Press the Menu button on the remote.
2. Cursor right to Setup and press the OK button on the remote.
3. Select Player Settings.
4. Cursor down to Network and press the OK button on the remote.
5. Select Easy Network settings and press OK on the remote.
6. Select Wireless and press OK on the remote.
7. Select your network. (

How do I turn off the lock on my Philips DVD player?

How to reset the Child Lock PIN on Philips DVD player?

1. In disc mode, press SYSTEM MENU.
2. Press Rewind/Forward button to select Preference.
3. Press OK to confirm.
4. Press Up and Down arrows to highlight PASSWORD, then press Play button to select CHANGE.

How do I turn off the region lock on my Philips DVD player?

Please follow the below procedure to set the regional settings of your choice on your Philips DVD player:

1. Turn on your DVD player (without disk)
2. Press “Setup” from the remote.
3. Go to the “Preferences”
4. Enter “138931” and the current zone will displayed.
5. Use the Up and Down arrows to change area (0 = multi-zone)

How do you bypass a region code on a DVD?

Besides DVD, you can also address the “DVD region codes bypass” issue from the DVD player….Free Hack DVD Players to Make it Region-free

1. Don’t put DVD disc in machine.
2. Press ‘Home’ on remote.
3. Press 8689310. Note: the last number is for desired region.
4. Finally, press 13893108520. DVD Region 0 will then be displayed.

How do I fix an unreadable blu-ray disc?

How do I fix an unreadable blu-ray disc?

1. Spray window cleaner on the disc and gently wipe from the center to the edge of the disc with a soft polishing cloth. Small scratches affect playback more if dirt is present.
2. Turn the cloth over and wipe the disc until dry.
3. Place the disc in the Blu-ray player and start the playback.

How do you clean a Blu-ray DVD player?

How to Clean a Blu-ray, XBOX, PS3, DVD or CD Player Laser Lens

Can Blu-ray drives read DVDs?

Yes, bluray drive works with cd and dvd.