How do you reset a Klipsch subwoofer?

The Three – Factory Reset

  1. Disconnect the power cable from the speaker and wall outlet.
  2. Plug the power cable back into the wall outlet.
  3. Press and hold down the source select knob on top of the speaker.
  4. While holding, plug the power cable into the back of the speaker.
  5. The speaker has been reset.

How do I get my Klipsch subwoofer to work?

Using a subwoofer cable (RCA cable), connect the subwoofer to the AV receiver by running the cable from the receiver’s subwoofer output to the subwoofer’s line input. Klipsch subwoofers can be connected via the LFE channel, the white RCA connection, or in a stereo pair by using both the white and red RCA connections.

How do you troubleshoot a Klipsch subwoofer?

Common Issues

Solution: Check to see where the subwoofer is plugged into on the back of the receiver. It needs to be plugged into a dedicated subwoofer, or “sub out”, channel. It’s possible it may be plugged into an RCA port that is not sending any audio or low frequency content.

Why is my subwoofer speaker not working?

Ensure the subwoofer has not been muted. Increase the volume level on the subwoofer. Ensure the speaker settings on the stereo system or TV have been configured properly to use the subwoofer. IMPORTANT: Certain speaker settings may disable the subwoofer.

How do I know if my Klipsch subwoofer is working?

To do this, let’s try something called a “buzz test”:

Instead, grab the unplugged end of the cable and touch the male RCA post a few times to see if you can hear the sub give you a “buzz” sound each time you touch the post.

How do I factory reset my Klipsch?

Please see below for step by step instructions on how to reset your earphones back to factory default settings.

  1. Long press the left, or right, earphone for 8 seconds while powered on and out of the case.
  2. Once done successfully, you will hear a voice prompt advise “earphones are reset” in both earphones.

How do you troubleshoot an active subwoofer?

You never want to connect or disconnect any cables while anything is on, lest something incurs accidental damage.

  1. Check connections and speaker wires.
  2. Check outlets, power cable, and fuse.
  3. Check system and menu settings.
  4. Verify connections, turn on the subwoofer, and set the volume.

How do you test a powered subwoofer?

How To Test A Subwoofer To See If It Works A Quick Test

Why won’t my subwoofer connect to my soundbar?

The reason your subwoofer won’t connect to your soundbar might be that the wall outlet is faulty, so check if it has power. Another reason might be that you didn’t plug in the power cords tightly and appropriately or that one of the devices is defective.

How do I know if my home theater subwoofer is blown?

Test the sound at a low volume to listen for whether your sub has been blown. If it is distorted, you have a partially blown subwoofer, and if there is no sound at all, it is completely blown. If the subwoofer is receiving its signal via a cable, then check the cable before rushing to conclusions.

How do you change a sub fuse?

Audio Source Subwoofer Fuse Replacement

Why is my Klipsch soundbar not working?

Unplug the TV and soundbar for 10 seconds, and then plug them back in. Sometimes, reestablishing the HDMI “handshake” between the TV and the soundbar can fix minor malfunctions. 8. Update the firmware in the TV and soundbar, and then cycle the power.

What phase should I set my subwoofer?

Typically, though, phase is left at 0° for most applications. While seated in your listening sweet spot, play music with bass content that is familiar to you and then have someone switch the 0/180 phase switch on the sub to 180-degrees. This will let you determine if the bass sounds louder in your seating position.

What is LFE on a subwoofer?

LFE (Low Frequency Effect) – The discrete content sent to the subwoofer from a Dolby or DTS encoded audio track. ( The .1 in a 5.1 or 7.1 audio track) LFE + Main – The low frequencies output to the Subwoofer whether the speaker channels are set to Large or Small.

What is LFE input on subwoofer?

You might know that LFE stands for low-frequency effects, but what does that actually mean? In brief, LFE cables connect your subwoofer (low-frequency speaker) to its receiver. Since the subwoofer is responsible for low bass tones (aka its sole purpose), it requires a transmitter of low-frequency audio waves.

How do I update my Klipsch soundbar?

Firmware Installation

  1. Download the latest firmware update file by going to and choosing Bar 48 from the “AVAILABLE FIRMWARE UPDATES” drop-down menu.
  2. Enter in your soundbar’s serial number (found on the back of the soundbar or subwoofer)
  3. Download and save the file folder to your desktop.

How do I reset my Klipsch 600 Soundbar?

You can perform a factory reset on the Cinema 600 by holding the power and the source buttons simultaneously for 10 seconds. To indicate a successful reset, you will see an orange source light (same color as the “TV” source) on the front of the bar, as well as three white LED’s.

How do I connect my Klipsch McLaren?

How to Pair the Klipsch – T5 II True Wireless Sport McLaren

  1. Open the case and press the button on the right earbuds thrice and it will go on pairing. or.
  2. Take both the earbuds out of the case and press and hold the buttons on both the earbuds for 4 seconds and they will go into the pairing mode.

Is it worth repairing a subwoofer?

A: The short answer to your question is no, the repair is likely not worth it. The price/performance ratio of subwoofers has improved considerably in the last decade, so finding a subwoofer that matches or beats the AS 20’s specifications—8″ driver, 60 watts RMS, 33 Hz to 140 Hz frequency response—is not too tough.

Do subwoofers have fuses?

Fuses for subwoofers can be located in-line with the subwoofer wires, within the speaker enclosure, and if there is an amp dedicated to the subwoofer, the fuse could be located there. In-line fuses can have different looks.

Can you fix a blown subwoofer?

Can you fix a blown subwoofer? Yes, you can fix a blown subwoofer especially when it is partially blown sub damaged cone. However, a damaged voice coil will be difficult to replace. Depending on the extent of the problem, the best solution is to purchase a new subwoofer.

How do I pair my subwoofer to my soundbar?

How To Pair A Samsung Soundbar With The Subwoofer

How do I reconnect my subwoofer?

How to Pair A Samsung Soundbar With Subwoofer

Why is the blue light flashing on my subwoofer?

When a product has a flashing blue LED, this indicates that it is in Bluetooth Pairing mode. For other input connections, use the button on the Soundbar, or the relevant input button on your remote control to change the input source to a wired connection.



Hi, I'm Nam Sun-Hi. My first name means: "One with a joyful demeanor." I'm a Korean student and author at I spend all my time either writing or studying. I love learning new things, and I think that's why I enjoy writing so much - it's a way of learning more about the world around me.