Amazon Firestick Not Working

Amazon Firestick Not Working: Easiest Troubleshooting 2022

One of the most well-liked streaming gadgets worldwide is the Amazon Fire TV stick. The gadget transforms a standard TV into a smart TV and is based on the Android operating system. Like users of any other device, Amazon Fire TV stick customers occasionally have problems or difficulties. Here are some frequent Fire TV device problems and solutions to help you utilize the streaming device more easily.

How to Restore a Failed FireStick

No matter how complicated the problem seems to be, restarting your FireStick, updating the firmware, or factory resetting your FireStick might fix it. So let’s examine those universal fixes. Before tackling the more difficult ones, you might want to start with these simpler options.

Fix that FireStick, please.

What’s wrong with my Amazon Fire Stick?

There are a number of potential causes for your Firestick issue, from a bad WiFi connection to a software issue. Restarting the device and WiFi router can often be helpful.

Troubleshooting for Amazon Firestick Not Working: Simplest

We’re going to examine the top seven issues that Firestick users encounter. Which of these problems you are experiencing will determine which fix is most likely for you. However, when it comes to some of these issues, there is a good amount of overlap.

Restarting the device, either through settings or the remote as explained below, is the best line of action if you’re seeking a general solution to a problem with your Firestick. Restarting your WiFi router is another option. This will address a lot of the most prevalent problems.

The last recourse for the majority of problems is to conduct a factory reset, which we look at later in this article if none of the other solutions on this list work. The setup procedure will need to be repeated, and you may need to reinstall any Fire Stick channels or apps you previously had, but this will have the best chance of resolving any recalcitrant problems.

Amazon Firestick Not Working 01
Image source: The Fartiste

You may also like: Why does my Firestick say resolution not supported?

1. The screen on my Firestick is blank

Turn the Fire Stick back on.

If your Firestick only has a blank screen, you should first try turning it off and on again. To do this without going to the settings screen, press and hold the “select” and “play/pause” buttons at the same time for about five seconds.

The Fire TV logo means that the device has shut down and is starting up again. This is also a sign that you can stop pressing the buttons on the controller.

Look at your batteries.

If this doesn’t happen and the device doesn’t restart, check to see if the batteries in the remote for your Fire Stick are still good. The remote that works with Alexa uses Bluetooth instead of IR, so it needs strong batteries to work well.

Check the HDMI link.

If the Fire TV device still only shows a blank screen, the last thing you can try is to make sure it is properly connected to the HDMI port on your TV.

You can connect the Firestick to your TV directly, or you can use the short HDMI cable that comes with it if you need more room. Amazon says that you should first try to make sure you’re using the cables that came with your device before trying any other cables. Also, if your TV has more than one HDMI port, you could try a different one.

2. My Firestick won’t be Responding

Turn the Fire Stick back on.

Like the last time, if a Fire TV device won’t respond, one of the best things to do is to restart it by holding down the “select” and “play/pause” buttons at the same time for a few seconds.

Look at the batteries.

If this doesn’t do anything, check the batteries in your remote. The Alexa remote uses Bluetooth, which uses a bit more power than a regular remote.

Pull the Firestick’s plug.

If your remote has new batteries and the restart button doesn’t work, you can restart the device by unplugging it and letting it sit for a minute before plugging it back in. As the device starts up again after you plug it back in, you should see the Fire TV logo.

3. Sort out issues with screen mirroring

“Enable Display Mirroring” must be turned on.

Go to your Fire TV’s settings and click on the “display and sounds” tab. In this part of the settings, you can choose to “Enable Display Mirroring.” Even if this mode isn’t turned on, many devices should still be able to mirror your Fire TV. However, turning this on will make it easier for other devices to find your Fire TV.

Using the same WiFi network

If things still aren’t working, make sure that both your Firestick and the device you want to mirror from are connected to the same WiFi network. Amazon also recommends that the devices be within 30 feet of each other, so moving them closer together can help if the connection isn’t good.

Upgrade your gadgets

Lastly, if either device isn’t up to date, it can cause Fire Stick mirroring problems, so make sure to check for updates on both the Fire TV and your other devices.

4. The Fire Stick app won’t work

Reinstall, Restart & Update Software

If your Fire TV apps keep crashing, there are a couple of things you can try. First, you can delete the app and reinstall it. Then, try restarting the device. It might also help to see if there are any software updates for your Firestick, in case the problem is caused by old software.

Use the Correct Cord and Adapter

Also, make sure you use the power adapter and power cord that came with the device. The Firestick is powered by a USB cable, so you could plug it into a phone charger or even a USB port on your TV, but that’s not a good idea.

Using a third-party power adapter could mean that the Firestick doesn’t get enough power or that it gets power at odd times, which could cause apps to crash or the device to freeze.

Try a reset to factory settings.

A factory reset is the last option. This is at the bottom of the “my Fire TV” settings tab, and it will reset the Amazon Fire Stick completely. This means that you’ll have to set up the Firestick all over again before you can use it.

5. My Fire TV Stick isn’t hooking up

Turn the router back on.

If your Amazon Fire TV Stick can’t connect to your WiFi network, restart your WiFi router as a first step. Usually, the easiest way to do this is to unplug the router, let it sit for about a minute, then plug it back in and wait for it to go through its boot-up process. While you wait for this, it wouldn’t hurt to turn off and on your Firestick.

Leave the WiFi Network alone.

If both devices restart and the Firestick still doesn’t connect to the WiFi properly, go to the “Network” page of your Firestick’s settings and press the menu button (the one with three horizontal lines) to forget your network. Sign back into the network to get back online.

Move the Firestick and Router closer to each other.

If the Firestick can’t connect to your WiFi at all, try moving the router and the Firestick closer together and getting rid of any metal objects that might be in the way.

Check if your router is compatible.

Last, make sure that your Fire TV works with your WiFi router. Since the Firestick can use almost all 5 GHz and 2.4 GHz networks, it’s unlikely that they won’t work together. However, very old routers might have trouble connecting.

6. My Fire TV remote doesn’t work

My Fire TV remote doesn't work

Use New Batteries

The remote for the Fire TV uses Bluetooth instead of infrared, which is how most other remotes work. This Bluetooth connection makes it possible for Alexa to be controlled by voice because it increases the bandwidth between the two devices.

But this means that the remote can use up batteries faster than some might expect and won’t work if the batteries aren’t charged enough. So, if your Firestick remote isn’t working right, you should first try new batteries.

Put the Fire TV remote back together.

If you’ve already tried new batteries and are still having problems with your Firestick remote, try holding the “home” button on the remote for about 10 seconds to reconnect it to your Firestick. Use your phone if you can and go to the Firestick’s settings menu. In the “controllers and BlueTooth devices” tab, click “add a new remote.”

Turn the Firestick back on.

If this doesn’t work, you could try unplugging the device and plugging it back in, or you could do a factory reset if you can control the Firestick from your phone and get into the settings.

7. Amazon Firestick is getting too hot

FireStick devices don’t usually have problems with getting too hot. Most of them don’t have that problem, though. But devices that tend to get too hot tend to get too hot a lot. If a FireStick gets too hot too often, it can be broken for good. If this happens, the only thing to do is to buy a new device.

Even if your FireStick doesn’t completely break if it gets too hot, it won’t work as well. This can cause problems like slow loading times, connection problems, and lagging.

If your device gets too hot, you can unplug it, wait a few minutes for it to cool down, and then plug it back in. When you unplug it, it turns off and can start over. Other ways to stop apps from running in the background are to clear the apps’ cache and data or force close them.

If none of these fixes work, you may have to reset your FireStick to the way it was when it was first made. This deletes all apps and app data, as well as any settings on the device. Hopefully, that will stop your car from getting too hot.

Amazon Firestick Not Working 03


How to get rid of apps and games from your Fire TV

To remove apps from your Fire TV, go to Settings, then Applications, then Manage, then Installed Applications, then select the app you want to remove, click Uninstall, and then follow the on-screen instructions.

Why does my Fire Stick automatically turn on and off?

If your Fire Stick turns on by itself, you need to turn off HDMI-CEC. There’s probably a problem if your Fire Stick turns off by itself. Try a different TV or a different HDMI port. If you’re still having trouble, try turning the device off and on again.

How do I fix the remote for my Fire Stick?

If the remote for your Fire Stick isn’t working, check the batteries and try to pair it with your Fire Stick again. Make sure you can see the TV and that nothing is in the way. Fire Stick can also be controlled with your smartphone.

How do I stop my Fire Stick from buffering?

If the video keeps pausing, turn off your device and then try again. If you’re still having trouble, you probably need to boost your Wi-Fi signal.

How do I fix my Fire Stick’s sound delay?

Go to Settings > Display and Sounds > Audio > AV Sync Tuning if you notice a delay between the sound and the picture. Follow the directions to get the video and sound output to work together.

What do I do if the settings won’t load on my Fire Stick?

Hold the Back and Right buttons on your Fire Stick remote for about 10 seconds to get to the reset screen if you can’t get to the Settings menu. After you reset the device, you should be able to get to your settings.

One Last Thing

If your problem wasn’t on our list, you might still want to try some of the solutions we mentioned. As with most electronic devices, a simple restart can often help. If nothing else works, a factory reset will often fix any problems, but it will erase everything on the device.

Has your Fire TV Stick given you a lot of trouble? Still happy with the device, or do you think another streaming dongle might be better? Did our ideas help you find a way out of the problem?

A Picture of Levi Alston
Levi Alston is a student at the University of Illinois Urbana-Champaign. He is currently studying computer science, and he plans to minor in business. Levi enjoys spending his free time on PC and internet forums, where he can talk about anything and everything with friends. He is a witty guy with a friendly demeanor, and he loves making people laugh.