Table of Contents
- Why do my Feit bulbs say offline?
- Do any smart bulbs work with 5Ghz Wi-Fi?
- Why are my smart lights unresponsive?
- How do you reset a smart light bulb?
- Why is my smart light bulb flashing?
- How do I connect my smart bulb without Wi-Fi?
- How do I reset my Feit smart plug?
- How do I change from 2.4 GHz to 5GHz?
- How do I connect my smart bulb to 5GHz WiFi?
- Can 2.4 GHz devices connect to 5GHz?
- Why won’t Alexa connect to my lights?[+]
Make sure the Wi-Fi network is a 2.4 GHz network. The Smart Wi-Fi Light will not connect to a 5 GHz network. If your Smart Wi-Fi Light is already on the right frequency, make sure that your phone is not using a VPN app in the background. 2.
Why is my smart light not connecting?
The Fix: Cycle Your Device, Router, or Smart Hub
We recommend first cycling the power to the device the bulb is plugged into to do a soft reset. Allow the smart bulb a minute to reconnect, then check to see if it is responsive.
How do you put Feit smart bulb in pairing mode?
Screw the light into a socket and turn it on. The light should start blinking indicating that the bulb is in pairing mode and ready for installation. If they are not blinking turn the light on for one second and off for one second, three consecutive times. When the light flashes rapidly, it is ready for setup.
Why are my Feit lights not working?
There may be a blown fuse or tripped circuit breaker cutting off electricity to your fixture. Your fixture or bulb may have burned out. Check that the wires connecting the dimmer are firmly secured.
Why do my Feit bulbs say offline?
According to Feit Electric, there are a few reasons why smart bulbs are not online: It could be because you’re experiencing a power outage in your area, your internet has been disrupted, your light was manually switched off.
Do any smart bulbs work with 5Ghz Wi-Fi?
Smart Lights in general do not work on 5Ghz. With a few workarounds, you could connect and control your smart lights on 5Ghz after you have connected them via the 2.4Ghz band.
Why are my smart lights unresponsive?
If a device Alexa connected to is unresponsive, start by checking your Wi-Fi. Your home network might be inactive or unstable, causing connectivity problems between Alexa and the device in question. This is the first thing you should get out of the way. Check that the connection is active and stable.
How do you reset a smart light bulb?
Get your smart lights in line with a manual reset
Why is my smart light bulb flashing?
Another loose electrical connection can occur with smart light bulbs that are attached incompletely to the light fixture or aren’t screwed in all the way, resulting in flickering. You can usually resolve this problem easily just by tightening the bulb.
How do I connect my smart bulb without Wi-Fi?
To control your smart bulb without WiFi, you simply turn on the light switch, open the Bluetooth app of the bulb, and the bulb automatically “found.” You then press ‘add device,’ ‘connect’ or ‘pair’ on the app. Then you control the bulb’s basic functions through the app as normal.
How do I reset my Feit smart plug?
To reset your Plug, hold the reset button down for approximately 5 seconds. When the blue indicator LED starts blinking rapidly, it is ready for setup.
How do I change from 2.4 GHz to 5GHz?
Go to Gateway > Connection > Wi-Fi. To change your Channel Selection, select Edit next to the WiFi channel (2.4 or 5 GHz) that you’d like to change, click the radio button for the channel selection field, then select your desired channel number.
How do I connect my smart bulb to 5GHz WiFi?
How To Connect Smart Bulb To 5ghz Wifi Router
Can 2.4 GHz devices connect to 5GHz?
The 2.4GHz WiFi is the default band for most routers because it’s older. The 5GHz frequency band only came later. This is the reason why there are devices that can connect to the 2.4GHz band but cannot support the 5GHz.
Why won’t Alexa connect to my lights?
If your smart light bulb isn’t working, or Alexa can’t discover it, reset your device. To reset your smart light bulb: Go to the manufacturer’s companion app or website to follow instructions specific to your device. Reconnect your smart home device to Alexa in the Alexa app.