Category: DIY & Crafts

Make sure that the fluid tube leading into the machine is not kinked or bent. Replace the fog switch if the machine does not fog when the READY light is Read more

To remove high strength Loctite thread locker you will need heat, up to 250° C. The heat will soften the thread locker, allowing the bolt to come loose. The bolt Read more

The best way to shorten lights wired in series is to remove an entire series section of lights by cutting lights apart where there are only has two wires, with Read more

What you need: a roll of electrical tape and two wires whose ends have been twisted together. First, lay the twisted part of the wires onto a strip of electrical Read more

To reset the light strip, locate the corded controller which is attached to the power supply of the light strip. Insert a paper clip, or a similar sized object, into Read more

How do you fix half LED Christmas lights? How to fix LED Christmas lights Why are half string lights out? A light bulb has come out of its socket or Read more

If half a strand is working and the other half is not, you probably have a loose or broken bulb. Start with the first unlit bulb and work your way Read more

The reason a clock pendulum often stops swinging, after being moved, is because the clock case now leans at a slightly different angle then it did at its former location. Read more

You just unplug it and wait let it cool down . Then plug it back in. Should only take about 5min. How do you fix a Royal paper shredder? Computer Read more

Simply bring the light tester close to each bulb. The tester’s indicator will light up when it’s near a functioning bulb. If you have a non-contact voltage detector, bring the Read more