Can I use CPU power cable to GPU?

The purpose of this cable is to enable an *unused* CPU power cable to power a GPU. It adapts the pinout of a spare 8-pin CPU power cable (EPS 12V) to that which can be used to power a GPU. This works well for people using dual power supply mining rigs.

Are GPU and CPU power cables the same?

Are Gpu And Cpu Power Cables The Same? There is no such thing as a similarity between them. In motherboard computers, the EPS Connector provides power for the motherboard CPU socket, while the PCI Express connector provides power to graphics cards.

Can I use one cable for GPU?

You can use a single cable’s multiple power connectors without fear of harm to your graphics card or tanking its performance. It’s usually fine.

Can you use Corsair CPU cable GPU?

Prominent. Wherever the psu has 8pin you can connect the cpu and gpu. The side of the cable which has white letters saying ‘CPU’ and ‘PCI-E’ are the ones that go to the cpu and gpu accordingly. The other side goes to the psu in any 8pin socket.

What cable is used for GPU?

The PCI Express x16 connection is the most common and widely method of connection for graphics cards. The PCI Express x16 can carry up to 75 watts of power to the graphics card.

Is PCIe cable a GPU?

Essentially, you need to have as many PCIe cables as your graphics card needs. Depending on your GPU, this could mean a single 6 pin cable all the way to 3 x 8 pin cables on powerful cards like the NVIDIA RTX 3090. Basically, PCIe components need to be powered, just like any other component on the motherboard.

Can you use a 6 pin on a 8 pin motherboard?

No, the 6+2 pin is for pcie supplementary power, it’s for GPU power basically the 8 pin on the mobo is for cpu power. Your power supply should have either a 4+4pin or a 4pin for cpu power, use that.

Can you use 8 pin CPU GPU?

So in theory the card should be absolutely fine. For reference, if the card has just an 8-pin connector, then if you powered it with an EPS12V, it would have been exposed to -12V which would have almost certainly have caused it to fry – and would probably also have taken the motherboard out along with it!

Are CPU and PCIe cables the same?

CPU/Mobo has: GND on pin 1-4 and 12V on pin 5-8, so one side is all power and one side is all ground. PCI-E has: 12V on pin 1-3 and GND on pin 4-8, so one side is all ground, but the other is mixed.

How much power will the 3060 need?

How Many Watts for RTX 3060? The RTX 3060 at its peak consumes around ~170 Watts. That’s why your power supply needs to have a minimum of 340 Watts, which is more than double the peak.

Is it okay to daisy chain GPU?

TL;DR – Don’t use Daisy Chain cables because most of the time they’re underspec and if you do the math they can pull more they’re rated for easily on a 3x8pin with a 400-500W power limit that has peaks in excess of the power limit. Always use 1 GPU power cable per 8 pin GPU power connector.

What power supply do I need for RTX 3060?

The NVIDIA GeForce RTX 3060 is not nearly as much of a power-hungry beast as the higher-end RTX graphics cards. The RTX 3060 has a power consumption rating of 170W. NVIDIA recommends that you use at least a 550W PSU. NVIDIA’s testing for this GPU was done with an Intel i9-10900K, which is quite a power-hungry chip.

Can you use PCIe for CPU?

The topmost PCIe-Slot is almost always connected to the CPU, but do consult your Motherboard manual to make sure this is correct.

Should PSU fan be up or down?

It is recommended to mount the power supply with its ventilation top cover facing DOWNWARD. The fan in the power supply will take in the warm air inside the computer case, and the power supply will exhaust the air through the back.

What is a PCIe cable?

PCIe cables are used primarily to provide power to the installed graphics cards and other large and power hungry expansion cards. PCIe cables connect directly from the Power Supply Unit to the installed PCIe Expansion Card; Graphics Card.

Can I use SATA to power GPU?

Only use SATA connectors on less power demanding GPUs like GTX 1060 6GB and if there is no other option available. Always check how much power does the GPU draws via the PCIe x16 slot before leaving the miner.

Does GPU need power supply?

Your graphics card won’t run unless you’ve connected it to your PSU. Most gaming-level graphics cards require additional power connectors. If yours does, make sure you connect those PCI-E power cables. Your graphics card will not function correctly without properly supplied power.

Can you run a graphics card without a 6 pin?

The card will throttle itself down without the 6 pin to prevent damage. Personally, I would not worry about it since your not pushing the card. If you start getting lock ups or BSOD’d, then power it up. I had a 8600GTS running for about 2 months without a 6 pin with no issues.

Is Sata to 6 pin safe?

If you are trying to use a SATA power to 6-pin PCI-e adapter to power a GPU, is not a good idea. Your PSU does not have 6-pin PCI-e because is not able to deliver the power (AMPs or voltage or both) a GPU needs. You could cause damage the PSU or the GPU or both.

Is VGA same as PCI?

Yes use them they are the same thing.

How do I connect my GPU to my power supply?

How to connect High Powered Graphics Card to PSU

Can CPU use 6 pin?

the 4 + 2 (6 pin) is probably for your video cards and probably will not work plugging into the CPU power.

Can you put a 6 pin PCIE into an 8 pin CPU?

Yes, it is compatible.

What cables come with RM850x?

What’s in the box

  • RM850x 80 PLUS Gold Fully Modular ATX Power Supply.
  • ATX CABLE 24-PIN (20+4)
  • 2 EPS/ATX12V CABLE 8-PIN (4+4)
  • 3 PCIe CABLE 8-PIN (6+2)
  • 2 SATA CABLE (3 SATA)
  • SATA CABLE (4 SATA)
  • 2 PERIPHERAL CABLE (4-PIN)
  • FLOPPY DRIVE ADAPTER (4-PIN)

What is an EPS power supply?

Entry-Level Power Supply Specification (EPS) is a power supply unit meant for high-power-consumption computers and entry-level servers.

What is EATX12V?

The cable your motherboard is requiring you to plug in is an 8-pin CPU/EPS ATX power, which is also called EATX12V, connector. This cable, depending on your PSU may be composed of one single 8-pin cable, or two 4-pin cables designed to be connected side by side.

Can I put cables under motherboard?

It’s perfectly safe, just make sure you don’t bend the motherboard with a bulge of cables.

Where does CPU cable Go PSU?

How to Connect a Power Supply to Your PC

What is PSU modular?

But what makes a PSU modular? Simply put, a modular PSU allows the builder to attach (or detach) cables as they’re needed. Traditional power supplies, on the other hand, have the cables attached permanently to the PSU.