Category: Electronics

Unplug the external component (if possible) for 30 seconds. Disconnect the HDMI cable from the TV and move it to an alternate port. Plug the device back in, and change Read more

Custom Unlocks through the DJI Fly Safe portal. If you’re planning on flying in a Restricted Zone or above an Altitude Zone, then you will need to request custom unlocking Read more

Turn your drone on and plug it into the computer with the DJI Assistant program. Open the program and wait for DJI Assistant to detect that your drone is connected Read more

Internal Storage Transfer DJI Mavic Air 2 to Mac How do I connect my Mavic Air 2 to my computer? These steps are the same for both smartphones, Android and Read more

All you need to do is to remove the SD card on the DJI Drone and insert that SD card to the computer using a card reader then you will Read more

When prompted by the app, or if wanting to connect to the WEB AP interface (Advanced options), connect your device to the Sky Viper via WiFi. The WiFi SSID will Read more

If you want to reset wifi, please turn on the remote controller and then turn the gimbal dial to the far right, toggle the S2 switch back and forth for Read more

If you Tello flashes red and green then nothing when turning on, It means that the firmware needs to be Force updated, To do this please follow the instructions below. Read more

No, not a powerbank . The DJI proprietary charger, or the 3 battery charging bank (which also requires the std. charger), or the car charger are required for charging MA2 Read more

In simple terms, if your drone is not pairing with your controller, you should: Make sure both batteries have got enough charge in them. Switch the batteries with new ones. Read more