How do I reset my DJI drone to sell?

Turn your drone on and plug it into the computer with the DJI Assistant program. Open the program and wait for DJI Assistant to detect that your drone is connected to the computer. Select the desired drone and go to Firmware Update, which will allow you to select Restore Factory Defaults.

How do I reset my spark?

Spark Smart Modem – How to factory reset your modem

  1. Power on your modem. Place a paper clip or pin into the hole on the back of the modem labeled Reset.
  2. Hold the paper clip or pin down for 10 to 15 seconds and release.
  3. The modem will reboot on its own. Once the WLAN light stops flashing, the reset process is complete.

How do I reset my DJI spark controller?

how to reset your DJI Spark Controller to default

How do I reset my DJI?

Open the “DJI GO 4” app on your computer device. Go to the top left corner of the screen and click on ‘Device’….To reset Dji drones with this software, follow these steps:

  1. Connect your drone to your computer via USB cable.
  2. Click on ‘Settings. ‘
  3. Select ‘Reset Settings’ to complete the factory reset of your DJI drone.

How do I unregister my DJI drone?

If you are referring to remove the drone from your DJI GO app, you can delete all the flight records under your account and the drone and records will be removed. I am sorry if there is any misunderstanding.

How do I reset my drone?

What is this? Step 1: Hold down the power button on the drone for 9 seconds (for DJI drones) until you hear three beeps. Then do the same on the controller. Step 2: The next thing is to power off both the controller and the drone.

What is the password for DJI spark?

The simplest and easiest way to connect is from your phone to the spark, what you will need to do is turn the Spark on, bring up your WIFI settings on your Spark and connect to your Spark through WIFI with the password being 12341234.

How do I reset my holy stone drone?

You can reset gyro by pulling down and left on both sticks at once. Hold until quad stops flashing. release sticks. quad should be reset.

How do I reset my Osmo pocket to factory settings?

Turn on the device. Then on the touch screen swipe down to open the Menu. Now tap the Settings icon. Once you’re in Settings scroll down to the bottom and tap the Factory Reset.

How do I reset my DJI Osmo phone?

2. Reset the gimbal

  1. Turn on your osmo mobile 3.
  2. Remove your mobile.
  3. Hold the zoom in/out slider upward and press the power button at the same time for 3 seconds.
  4. Then resle both simuntlinly.
  5. The gimbal will reset.

How do you reset a drone battery?

DJI Phantom 4 – Battery reset and what’s inside the case

How do I delete my DJI account?

1. Log in to the DJI account via DJI PC Store, go to “My Account” and take a screenshot of “My Account”. 2. Send the account delete request from the DJI account email address to and state clearly that “I agree to delete the DJI account XXXX”, also attach the screenshot of “My Account”.

How do I remove a device from my DJI account?

Activated drones stay onto your DJI Account. The only way to eliminate them from your account is to start over and create another DJI Account, But note, your old account information still stays on the server.

How do I sell my registered drone?

How to sell your old drone

  1. 1) Remove your FAA registration. If you have only a very small drone, like the DJI Mavic Mini, you can skip this step.
  2. 2) Format your SD card.
  3. 3) Record cumulative flight data.
  4. 4) Gather up your accessories and packaging.
  5. 5) Clean up your drone and accessories.
  6. 6) Take photos.
  7. 7) Pick a marketplace.

How do I reset my DJI air unit?

DJI FPV Controller Beeping, How to Reset, Recalibrate, and Calibrate

How do I calibrate my drone?

While holding the drone level with the ground, spin it horizontally until a light turns green. Next, rotate the drone vertically (to the ground). Slowly spin until the second light turns green. If you have made an error during calibration, there will be a red flashing light.

How do I reset my DJI Mavic?

To reset your drone’s Wi-Fi back to the default settings, press and hold the drone’s power button for 9 secs. When you hear three rapid beeps, you can let go. To verify that the reset worked, you should be able to see the Mavic’s network on your mobile device. Try and connect to it.

How do I reset my spark WiFi password?

Press and hold the Spark’s power button until the drone beeps once, twice, and then three times (9-10 seconds). This resets the Spark’s WiFi network. From here, locate your Spark’s carrying case. The WiFi password will be listed next to the QR code.

How do I reset my spark password?

Forgotten your MySpark password

  1. Go to MySpark.
  2. Select Forgotten password? (if you’re using your mobile, select Forgot?)
  3. Type in your email address.
  4. Select Send.
  5. An email will be in your inbox with a link to change your password.
  6. Select the link.
  7. Type in a new password.
  8. Type in your new password again to confirm it.

How do I find my DJI password?

When you sign-up with D1 Store, you will receive an automatically generated password. This password is emailed to your registered email address and will remain there until you change or forget the password. We recommended changing your password as soon as possible.

Why is my drone not connecting?

In simple terms, if your drone is not pairing with your controller, you should: Make sure both batteries have got enough charge in them. Switch the batteries with new ones. Pair the controller correctly to the drone using the correct procedure.

How do you reset a DJI mini?

There is no factory reset for Mavic Mini, you can refresh the firmware to initialize the settings. Why not? Much needed. Hello, when you sign out your DJI account from the DJI App.

How do I reset my DJI Air 2?

There is no option to restore the factory settings on the actual drone, however, we do have an option to refresh the firmware using the DJI Assistant 2 software. In addition, once you sell your unit to a different user, he/she can just install the DJI Fly app on his/her own mobile device.

How do I reset my DJI MIMO?

How to Factory Reset DJI OSMO ACTION – Restore Defaults / Wipe …

How do I reset my DJI Osmo 5?

Press the switch button, shutter/record button, and trigger simultaneously to reset the Bluetooth connection. The Bluetooth connection is reset successfully when the system status indicator turns from green to yellow. Search DJI OM 5 and reconnect.

How do I recenter my DJI Osmo pocket?

Press the button twice to recenter the gimbal and press the button three times to switch the camera between facing forward and backward (requires firmware version v1. 2.0. 20 or higher). In the touch screen settings page, press the button once to go back to the previous menu.



Hi, I'm Nam Sun-Hi. My first name means: "One with a joyful demeanor." I'm a Korean student and author at I spend all my time either writing or studying. I love learning new things, and I think that's why I enjoy writing so much - it's a way of learning more about the world around me.