How do you test a washer control board?

How to Diagnose Washing Machine Control and Program Problems

How do you reset the control board on a washing machine?

To reset the electronic controls on your washer, shut off the circuit breaker or fuse to the washer or unplug the washer for 2 minutes. For models that have a timer control knob, turn the knob around and back to any position other than final spin for the interrupted cycle. Then, restore power.

Can a washer control board be repaired?

W10671325 Whirlpool Laundry Washer Control Board Repair

We will quickly repair your control circuit board. We do more than just repair the part, we go to the root of the problem and use the high quality parts to ensure the issue does not return.

What does the main control board do for a washing machine?

The motor control board regulates the speed at which the washer spins. If the motor control board is defective, the washer won’t spin or agitate.

How do you test an appliance circuit board?

Diagnosing a Bad GE Board – Part 1: Fan Motors

How do I reset the control panel on my Whirlpool washer?

Follow these steps to reset your Whirlpool washer:

  1. Turn the washing machine off using the control panel.
  2. Unplug the washing machine.
  3. Wait three minutes.
  4. Plug the washer back in, and wait thirty seconds before turning the washer on.

Does unplugging a washer reset it?

On a machine without a reset button, unplugging the washer and then plugging it back in often serves as the means to reset it. Although not usually a button, programmable washing machines might have a reset function or position to clear a program problem.

What are common problems with washing machines?

10 Most Common Washing Machine Problems

  • It Bounces Around.
  • It’s Noisy.
  • Clothes Are Getting Ripped.
  • Improper Or Slow Draining.
  • My Washing Machine Won’t Spin.
  • There’s No Water.
  • The Door Won’t Open.
  • It’s Smelly.

Why is my washing machine not turning on?

First, make sure the power is on and that the machine is plugged in. You should check the outlet to make sure it’s working. Then, check if a fuse is blown or a circuit breaker thrown. If those both work, see if the Delay Start button or Control Lock feature has been activated.

How do I fix the control board on my Samsung washer?

Samsung Washing Machine Main Control Board #DC92-01063A

How do I change the control board on my LG washer?

LG Washer Main Control Board Replacement EBR86771821

How do I replace the control board on my GE washer?

GE Top-Load Washer Control Board Replacement #WH12X10524

How much does it cost to replace the control board on a washing machine?

Due to the difficulty of diagnosing a control board problem, the whole board is replaced. A control board replacement can range from 150 to 800 dollars. If considering a control board replacement, often times consumers choose a new washer due to overall expense related to the cost of a new one.

How much does it cost to replace a washing machine control panel?

The motherboard is also known as a circuit or control board. The control board is a sensitive component of any washer. If it’s faulty, you may be unable to operate the washer’s settings properly. You have to budget $275 to $400 when planning to replace a Whirlpool washer’s control board.

Does a washing machine have a circuit board?

Normal washing machines, both consumer and commercial grades, are commonly installed with a washing machine circuit board. The circuit board is responsible for ensuring that the machine carries out all the washing functions correctly, and it also commonly times the functions.

How do you know if your circuit board is burnt out?

Signs of Overheating on Your Circuit Boards

  1. Burnt, brown or blackened components.
  2. Burn marks on the board substrate.
  3. Delamination of the board.
  4. That well-known “burnt electrical smell”
  5. Cracks in the solder joints (typically caused by repeated overheating and cooling)
  6. Broken traces.

How can you tell if a circuit board is bad?

Examine the circuit board and search for signs such as crushed components, bulges, damaged wires, cracks, misplaced or extra solder, burn marks and scratches that indicate that the board is either bad or requires replacement and professional assistance.

How do you troubleshoot a circuit board?

Steps to Fix and Troubleshoot PCBs

  1. Step #1. Clean the PCB.
  2. Step #2. Take off the Damaged Pad.
  3. Step #3. Clear Away Laminate Around the Pad.
  4. Step #4. Remove Old Solder Mask.
  5. Step #5. Clean With Alcohol.
  6. Step #6. Prepare the Conductor.
  7. Step #7. Examine and Choose the Appropriate Circuit Frame.
  8. Step #8.

Where is the reset button on a washing machine?

Washer Not Spinning – How to Reset Motor (Easy)

How do you reset a direct drive on a Whirlpool washer?

Rotate your dial until you have the following three lights illuminated: RINSE, WASH, and STOP. Then turn off your washer and unplug it for ten seconds. When you turn it back on it should be reset. You can run a test load without any clothing to ensure that the reset worked.

How do I run a diagnostic on my Whirlpool washer?

Whirlpool Washer Test/Diagnostic Mode

How long does it take for a washing machine to reset?

If you see no change, you can try a Master Reset. This will reset all of the onboard componentry and is often successfully used by appliance technicians. Open and close the door of the washing machine 6 times within 12 seconds.

What happens if you unplug a washing machine?

Is it safe to unplug a washing machine? The short answer is yes – it’s safe to unplug your washing machine. In fact, it’s often recommended that you unplug your washer when it’s not in use to save energy. Before you undertake any kind of work on your machine, you should unplug it from the mains first.

Why is my washing machine stuck on spin cycle?

If your top load washing machine (or some older front load washers) is stuck on one continuous cycle and will not advance and forward to the next wash cycle, then most likely the washer timer is faulty and needs replacement. The timer on your washing machine controls all aspects of the wash, spin, and rinse cycles.

What are the four trouble symptoms of washing machine?

Common Washing Machine Problems and Solutions

  • Vibrating Washer.
  • Leaky Washer.
  • Noisy Washer.
  • Washer Won’t Run.
  • Washer Won’t Drain.
  • Detergent Won’t Dispense.
  • Smelly Washer.

Is it worth repairing my washing machine?

As a general rule, if it costs less than 50% of the price of a new washing machine to repair your old one, you should choose the repair option. But, you should also consider whether or not there is a warranty coverage on your washer and think about economic realities.

How do I know if the motor is broken on my washing machine?

Set the multimeter on the lowest setting, or RX1. Touch a probe to a metal tab. You should get a 0 reading or a number near 0. An infinite reading indicates a failed motor.

Is there a fuse in a washing machine?

Washing machines have fuses that protect them from power surges. Washing machines require lots of power to run. To prevent electricity from frying its electrical componentry and making the entire appliance useless, an automatic washer has either one or two main fuses.



Hi, I'm Nam Sun-Hi. My first name means: "One with a joyful demeanor." I'm a Korean student and author at I spend all my time either writing or studying. I love learning new things, and I think that's why I enjoy writing so much - it's a way of learning more about the world around me.