Why is my LG washer not spinning?

If the lid switch assembly fails, the washer will not spin. To determine if the lid switch assembly is defective, use a multimeter to test the lid switch for continuity. If the lid switch does not have continuity, replace it. Inspect the drive belt to determine if it is broken or if it is loose on the pulleys.

Why is my washing machine washing but not spinning?

Normally, your washing machine won’t go into a spin cycle until it’s been drained. The drainage hose may become clogged with debris from your clothing, or it could be kinked. If the hose is kinked or crushed, it will likely need to be replaced.

How do I force my LG washer to spin?

For LG front load washers, turn the unit on and without touching the selector dial move to the spin speed selection button. Then press the button until you see your desired spin speed highlighted. Then press the Start button. The unit will drain any excess of water before it spins.

How do I reset my LG Tromm washer?

How to reset the washing machine:

  1. Press POWER to turn the washer off.
  2. Unplug the washer from the power outlet or turn the circuit breaker to the unit off.
  3. With the power disabled, press and hold the START/PAUSE button for 5 seconds.
  4. Plug the washer back in, or turn the circuit breaker back on.

How do you fix a front loader washing machine that will not spin?

Front-Load Washer Won’t Spin — Washing Machine Troubleshooting

How do I put my LG washer in diagnostic mode?

Press the POWER to turn on the washer. Place the mouthpiece of your phone between the Smart Diagnosis logo and the POWER button. After pressing the Start Diagnosis button, press and hold the TEMP button until a countdown displays on the washer. Keep the phone in place until the tone transmission has finished.

How do I drain my LG Tromm washer?

If you want to perform a drain-only cycle, turn on your LG washer and press the spin button and then press start. After a few minutes, the cycle will end and your washer should have drained out the water. Another way you can drain the water is by turning off your washing machine and unplugging it from the outlet.

How do I drain the water from my LG front load washer?

Open the access panel. This is located on the front of your washer at the bottom left corner. Place a shallow pan next to the access panel, and pull the drain hose out from its clip so that it will drain into the pan. Take the plug out of the drain hose, and let it drain completely into the pan.

Why is my LG front load washer not draining?

Unbalanced Load. One of the most common reasons your LG washer won’t drain often results from an unbalanced load. Washing a large or heavy item can cause it to settle on one side of the washer drum. When this happens your LG washer won’t drain or spin properly and water will be left behind.

Do LG washers have a reset button?

LG washing machines like most other machines in recent times come with a reset button. This feature allows you to restart the washer if there is an error code flashing in the digital display in the control panel.

How do I troubleshoot my LG washer?

How to Troubleshoot LG Washer Problems

  1. Adjust your clothes.
  2. Check the drum and drain filter for foreign objects.
  3. Adjust the leveling feet at the base of your LG washer.
  4. Check your hoses.
  5. Check the power.
  6. Contact LG customer support, if none of the previous steps help.

How do you test a LG Hall sensor?

How to test the Hall Effect Sensor or position sensor in a washer.

How do I reset my LG front load washer?

How to reset the washing machine:

  1. Press POWER to turn the washer off.
  2. Unplug the washer from the power outlet or turn the circuit breaker to the unit off.
  3. With the power disabled, press and hold the START/PAUSE button for 5 seconds.
  4. Plug the washer back in, or turn the circuit breaker back on.

How do you put a washing machine in diagnostic mode?

How To Put Your Washer In Self Test Diagnostic Mode (Whirlpool Built)

How do you put a washing machine in self test diagnostic mode?

Whirlpool Washer Test/Diagnostic Mode

How do I test my LG washing machine drain pump?

Test the drain pump.

  1. Press POWER to turn the washer ON.
  2. Press the SPIN SPEED key until HIGH is selected.
  3. Press the START/PAUSE button to start the SPIN ONLY cycle.
  4. Listen to hear a humming sound which indicates that the drain pump motor has started working.

How do you fix a LG washer that won’t drain?

LG and SAMSUNG WASHER Won’t DRAIN—QUICK FIX

How do I know if my LG washer pump is bad?

OE Error Message / LG Washing Machine Drain Pump Replacement

How do I manually drain my LG washer?

Press the POWER button to turn the washing machine off and remove the plug from the outlet. Locate the service panel on the bottom-left corner of the unit and open it. Unclip the drain hose and remove the plug from the drain hose to drain the water remaining inside the wash tub.

Where is the drain pump on a LG front load washer?

Replacing the Drain Pump (LG Part # 4681EA2001T)

How do you fix a washing machine that will not drain?

What to Do When Your Washing Machine Won’t Drain

  1. Perform a Master Reset. Unplug your washer for about one minute.
  2. Test the Lid Switch Assembly.
  3. See if the Drain Hose is Kinked.
  4. Check the Drain Hose or Pump for Clogs.
  5. Clean out the Coin Trap.
  6. Check the Water Level Control.
  7. Schedule Washing Machine Repair.

How do you know if your washing machine drain hose is clogged?

Observe the washing machine as it pumps water into the hoses and up into the standpipe. If you see water back up and out of the standpipe, your washer’s drain is most likely the issue. The amount of time it takes for the standpipe to fill up and overflow helps you diagnose where the clog is located.